A2D Solutions : Video Converters : For-A Converters : For-A Mighty Coder D/A

For-A Mighty Coder D/A

Correctors/ Processors/Converter

For-A

Digital-to-Analog Encoder
MightyCoder d/a Compact serial digital component to analog converter which is a cost saving answer to integrating existing analog monitorsin facilities switching over to digital support. MightyCoder power supply frame and module options also let up to 20 converters be connected to, and powered by, a single EIA 1RU frame.

Accepts1 ea. serial digital component input.
Outputscomposite, component, and reclocked serial digital (input)simultaneously.
Selectabledigital filters and built-in color bar generator.
Signal presence and power indications.
Sized small enough to fit in almost anyspace.

Attention: The input signals below don't convert into correct outputsignals.
Digital component signals correspondingto 8ch embedded audio signals.
Digital component signals whichembedded audio corresponds to 24-bit resolution
Digital component signals come out fromIMX (SONY).

Specifications
Standard	NTSC, PAL, or PAL - M (selectableby Internal dip switch)
Inputs	Digital component: 270Mbps, 75Ω,1ea., BNC (w/ 2ea., active loopthrough)
Outputs	Selectable as below
Analog composite	1.0Vp-p, 75Ω, BNC
Y/C	Y: 1.0Vp-p, C: 0.286Vp-p (NTSC) /0.3Vp-p (PAL), 75Ω, 1ea., BNC
GBR	G/B/R: 1.0Vp-p (0.7/0.3)(Selectable sync ON/OFF), 75Ω, 1ea., BNC
YUV	Y: 1.0Vp-p, U/V: 0.7Vp-p (BETACAMlevel), 75Ω, 1ea., BNC
DG / DP	1.5% / 1.5¼ (composite),2.0% /2.0¼ (component)
S/N Ratio	Better than 52dB
Output DC Blanking Level	334mV typical (composite), 668mVtypical (component Pb /Ph)
Chroma to Luma Delay Inequality	10ns typical
Filter Response	(-3dB bandwidth)
Low Pass	Y: 4.2MHz, C: 2.05MHz -3dB
Notch	Y: 2.1MHz, C: 2.05MHz -3dB
High Band	Y: 5.6MHz, C: 2.05MHz -3dB
Temperature / Humidity	10ºC - 40ºC / 30% - 90%(no condensation)
Power / Consumption	6VDC / Approx. 4VA
Dimensions	115 (W) x 32 (H) x 76 (D) mm
Weight	Approx. 0.25kg (w/o power supply)
Accessories	Operation manual , AC cord
Options	MC-PS-FR: Power module frame.Accepts up to 4 modules (MC-PS-5). MC-PS-5: Power module. Powers up to 5 MightyCoders.

For-A Mighty Coder D/A Correctors/ Processors/Converter
	Item#
	MIGHTYCODER	CALL	0.00
For-A Mighty Coder D/A