Audio Embedder & De-embedder

Audio Embedder & De-embedder Module UFM-100AED The UFM-100AED, an audiointerface for UFM-145DFS, provides audio embedding and de-embedding. Features: Module for UFM series frames. Embedder and de-embedder. Accepts both AES/EBU analog and digital input audio, providing analogand digital output audio. Two stereo channels (4 monaural channels). Built-in variable range (1ms to 999ms) delay line. High-quality 24-bit quantizing, 48 kHz sampling frequency audio. Usable in discrete form as an A/D converter, D/A converter/sample rateconverter (to 48 kHz) or delay line. (UFM-100AIO required). AnalogUnit Specifications InputSignals 2 stereo (4monaural) channels, balanced/unbalanced* +4dB. Input reference levelcan be changed by an internal setting. (-20 / -10 / 0 / +4 / +8dB;factory setting: +4dB) Input Impedance 600 or more than 20k (can be changed by an internalsetting; factory setting: 600 ) Output Signals 2 stereo (4 monaural) channels, balanced/unbalanced* +4dB Input reference level can be changed by an internal setting. (-20 / -10 / 0 / +4 / +8dB; factory setting: +4dB) Output Impedance Low impedance (less than 100) when balanced Low impedance (less than 50 ) when unbalanced I/O Connector 12-pin terminal block(ETB86-12P by Osada) x 1 3.5 mm pin pitch, AWG16 - AWG28 wire diameters supported SamplingFrequency 48kHz Quantization 24-bit Max. I/O Level +24dB (when balanced), +18dB(when unbalanced) Output Load Resistance More than 600 D/A de-Emphasis None or 50/15us(Automatically switched according to input channel status)   *Unbalanced can be supportedby signal wire connections. System-based adjustments are required forthe signal level. DigitalUnit Specifications Input Signals AES/EBU CH1/2, CH3/4unbalanced 1.0Vp-p, 2ea., BNC SDI embedded audio CH1/2, CH3/4 (using UFM-145DFS connectors) Input Impedance 75 Output Signals AES/EBU CH1/2, CH3/4unbalanced 1.0Vp-p, 2ea., BNC SDI embedded audio CH1/2, CH3/4 (using UFM-145DFS connectors) Output Impedance 75 DigitalReference Level -18dBFS, -20dBFS (factorysetting: -20dBFS) InputQuantization 16-bit - 24-bit Input SamplingFrequency 32kHz / 44.1kHz / 48kHz(AES/EBU) 48kHz (synchronized with SDI embedded audio, video) OutputQuantization 20-bit or 24-bit Output SamplingFrequency 48kHz Phase betweenChannels Within 10µs SDI Audio Group (Embedding/De-embedding) Embedding: Any one of four groups supported De-embedding: Any one of four groups supported *When linked up with UFM-145DFS (internal setting) ProcessControl Unit / REF Unit Specifications Analog OutputLevel Variation Range ±6dB (level changedfor each channel using front panel VR controls) Stereo Mode Modes below selected by aninternal setting Stereo, monaural L, monaural R, monaural SUM, LR reversed Minimum Delay 4ms Delay Adjustment Range 4ms - 999ms (in 1msincrements) REF Signal When linked up withUFM-145DFS: Synchronized with REF VIDEO clock When used in discrete form: Free-running GeneralSpecifications Temperature /Humidity 10ºC - 40ºC / 30% -90% (no condensation) Power /Consumption 12VDC - 24VDC, supply from UFframe / Approx. 8.4W Dimensions 106 (W) x 303 (D) mm (Front) 108.5 (W) x 66.1 (D) mm (Rear) Weight Approx. 0.5kg Necessary Slots Front panel: 1 slot Rear panel: 1 slot, input-only or output-only Rear panel: 2 slots, input/output supported, when UFM-100AIO (option)is used Accessories Operation manual Options UFM-145DFS (for embedding,de-embedding) UFM-100AIO (when used in discrete form or for embedding, de-embedding)