Distribution Amplifiers

For-A
HD/SD Down Converter with Video Distributon Amplifier

This is a down-converter and video distribution amplifier used for monitoring applications and is available in a modular format for installation in a UFH frame. It can convert HD-SDI signals into SD-SDI signals and analog signals or convert SD-SDI signals into analog signals.Down-conversion of HD-SDI signals into SD-SDI signals and analog signals (HD or SD)Conversion into any of four aspect ratios (4:3, 13:9, 14:9, 16:9, squeeze)Selection of analog signal output enabled (YPBPR, GBR, Y/C, composite signals)Sync output signals for monitoring supportedProcess control functions provided (video level, chroma level, chroma phase, setup/black level)Built-in cross color reduction circuitSelection of enhanced level enabledProvide 4-way distribution of HD/SD-SDI signals.

Specifications
Standard	HD: 1080/59.94i, 50i, 720/59.94p,50p
	SD: 525/60 (NTSC), 625/50 (PAL)
Video Input	HD SDI: 1.5Gbps or SD SDI: 270Mbps, 75?, 1ea., BNC
Video Output	HD SDI: 1.5Gbps or SD SDI: 270Mbps,75?, 4ea., BNC (Active through)
	SD SDI: 270Mbps, 75?, 2ea., BNC
	Analog Output: Refer to below
	GBR (HD) or YPBPR (HD) or GBR (SD)or Y/B-Y/R-Y (SD) or Y/C (SD) or Composite (SD) or 2-level sync ortri-level sync output
	Y or Y/C or Composite: 1.0Vp-p, 75?/ GBR: 1.0Vp-p, 75? (with sync) / PBPR or B-Y/R-Y: 0.7Vp-p, 75?/2-level sync: 0.3Vp-p, 75? / tri-level sync: 0.6Vp-p, 75?, 4ea., BNC
Quantization	Y: 10-bit, C: 10-bit
Sampling Frequency	HD SDIY: 74.25/1.001MHz or74.25MHz, C: 37.125/1.001MHz or 37.125MHz
	SD SDIY: 13.5MHz, C: 6.75MHz
Process Control	Video Level: Over ±3dB Chroma Level: Over ±3dB HUE: ±30° Setup / Black Level: ±15IRE
Temperature / Humidity	10ºC - 40ºC / 30% - 90%(no condensation)
Power / Consumption / Draw	Supply from UFH Frame, +24VDC /Approx. 10.8VA (10.8W) / Approx. 450mA
Dimensions / Weight	138.5 (W) x 400 (D) mm(Frontboard),141 (W) x 101 (D) mm(Rear board) / Approx. 1.0kg
Require Slot	2 slot
Accessories	Operation manual