Distribution Amplifiers

For-A
Analog Video Distribution Amplifier

This analog video distributor modules can be installed in a UFM frame. The UFM-18VDA can distribute one video signal input into eight outputs. It is also equipped with an input signal relay bypass function.Analog video distributor for distributing one video signal input into eight outputs.- Gain control can be made from the front.- Input signal bypass output function.- Internal settings can be used to set loop-through for video input.

Specifications
Input	Composite: 1.0V(p-p), 75? or high-impedance loopthrough, 1ea.
Output	Composite: 1.0V(p-p) ±0.3dB,75?, 8ea.(7ea. at Input loopthrough), BNC
Output Gain Range	±3.0dB for input signal
Output DC offset	±10mV (at clamp),±10mV for input signal (at DC couple), OFF clamp, AC coupleoutput
Frequency	100kHz - 12MHz ±0.3dB (100Hzbase)
K Factor	Less than 1%
DG/DP	Less than 0.5% / 0.5° (NTSC/PAL)
S/N Ratio	Better than 60dB(p-p/rms)
Temperature /Humidity	0ºC - 40ºC / 30% - 90%(no condensation)
Power / Consumption / Draw	+12VDC - +24VDC ±10% /Approx. 2.9W / +12VDC: Approx. 0.26A, +24VDC: Approx. 0.13A
Dimensions / Weight	106 (W) x 303 (D) mm (Front board), 108.5 (W) x 20 (H) x 303 (D) mm (Front board) / Approx. 0.5kg
Require Slot	2 slot
Accessories	Operation manual